SAMPA
SAMPA MPW1 documentation
This page has moved to https://twiki.cern.ch/twiki/bin/view/ALICE/SAMPA
Analogue
SAMPA MPW1 Chip 1 testplan and documentation
SAMPA MPW1 Chip 2 testplan and documentation
DSP
SAMPA MPW1 Chip 3 specifications
Heitor Guzzo Neves Thesis (DSP description)
SAMPA DAQ Board Firmware and Software
Source Code Repositories
Documentation
SAMPA DAQ board specifications
Registers
See SAMPA Registers for latest updated information on SAMPA registers.
See SAMPA DAQ Registers for latest updated information on SAMPA DAQ registers.
Compiled DAQ Firmware and Software Versions
The version is the same as the SVN version it was compiled from If Windows renames the sampa_server or kernel with a .txt ending you need to remove this ending before copying the file to the memory card.
All latest files
- Download
- SD Card image
- sampa_server program to be put on SD card
- FPGA firmware with internal SAMPA (controllable)
- SAMPA communicator
- SAMPA analyzer (Windows binary) (ROOT 5.34/24)
- SAMPA analyzer (ROOT code)
- Kernel (copy to SD-card)
- devicetree (copy to SD-card)
- bootloadere (write to SD-card with dd/win32diskimager)
Revision 63
Added basic run control to communicator and firmware. A set number of packets can be acquired. Fixed twos complement to ones complement conversion for ADC. System upgraded for Quartus 14.1 Kernel updated to 3.16
- Download
Revision 59
Added status register for ADC pins and a register for the version of the running sampa_server. Added root file generation for the analyser.
- Download
Revision 55
Fixed readout. Use SD Card from rev42 and add sampa_server.
- Download
Revision 42
- Download
Network fix
To set a fixed mac: Connect to terminal, warm reboot (key 6), press key in terminal to stop at uboot, type
setenv ethaddr '7e:a5:87:ec:06:03' saveenv boot
Root compile problem
LNK1123: failure during conversion to COFF Install VS2010 SP1