FOCAL - Forward Calorimeter: Difference between revisions
(reordering) |
m (added first parts list) |
||
| Line 24: | Line 24: | ||
[http://www.petalogix.com/resources/documentation/petalinux_sdk] | [http://www.petalogix.com/resources/documentation/petalinux_sdk] | ||
== Download section == | |||
== Shopping list == | |||
1x 2U 335mm Rack mount enclosure, Grey - 665-7712 - 556,29 | |||
1x RD-125A Switch Mode PSU, 5V/15A,12V/10A - 644-6941 - 662,16 | |||
3x DC/DC PoL,DOSA,2.4-5.5Vin,0.75-3.3Vo 6A - 150-758 - 116,16 | |||
1x 4.20mm,housing,MiniFit,receptacle,DR,6w, - 679-5773 - 2,064 | |||
http://www.samtec.com/search/vita57fmc.aspx | |||
Revision as of 14:00, 17 February 2011
This page should contain information about the Focal project, especially about the interfacing from the Mimosa chips to the readout electronics.
Overview
Mimosa chips
Readout electronics
Adapterboard
The schematics of the board can be found here: Adapterboard
Control and Readout board
The idea is to use a Xilinx Virtex 6 development board as a first prototype. The board would run Petalinux, and some software to access the firmware registers. A software framework for the TPC detector is to be adapted for the use on the Xirtex 6 board and Petalinux.
Firmware
The VHDL counterpart is to be found here: http://web.ift.uib.no/kjekscgi-bin/viewcvs.cgi/alice-fw/trunk/messagebuffer/
Software
The software driver for the message buffer system can be found here: http://web.ift.uib.no/kjekscgi-bin/viewcvs.cgi/alice-dcs/trunk/rculinux/dcscMsgBufferInterface/
Petalinux documentation: [1]
Download section
Shopping list
1x 2U 335mm Rack mount enclosure, Grey - 665-7712 - 556,29 1x RD-125A Switch Mode PSU, 5V/15A,12V/10A - 644-6941 - 662,16 3x DC/DC PoL,DOSA,2.4-5.5Vin,0.75-3.3Vo 6A - 150-758 - 116,16 1x 4.20mm,housing,MiniFit,receptacle,DR,6w, - 679-5773 - 2,064 http://www.samtec.com/search/vita57fmc.aspx