CAEN 40CH HV PSU

From ift
Revision as of 13:26, 6 March 2009 by St12361 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This how to is based on using the functionality of the custome Labview VI's. Refer to the User Manual for using the Terminal interface of the unit.

RS 232-Setting

Baud Rate: 9600 Parity: None Data Bits: 8 Stop Bits: 1 Flow Control: None


Kladd

min. write time between commands: 60ms (30 ms worst case)

Bytes recieved (From top Menu @ 9600 bauds) "1": 256 bytes (220 ms) "1+b": 170 bytes (150 ms) "1+b+a": 273 bytes (230 ms) "1+b+a+n": 272 bytes (230 ms) "1+b+a+c/i/j..": 14 bytes (15 ms) "1+b+a+c/i/j..+X": 1 bytes (1 ms) "1+b+a+c/i/j..+X+/r/n": 272 bytes (230 ms)

Retrieved from "http://ift.wiki.uib.no/index.php?title=CAEN_40CH_HV_PSU&oldid=232"