IHP 130nm process: Difference between revisions
m Specified mikroserver2 or mikroserver3 (1 does not work atm) |
m Removed uneccesary bash alias and linked to the setup page instead. |
||
| Line 19: | Line 19: | ||
virtuoso & | virtuoso & | ||
To | To avoid having to do this every time try to set up your environment like described in [[MikroserverSetup]] | ||
| Line 27: | Line 25: | ||
Follow the Design Kit User manual found in the menu SG13S Features > Design Kit Documentation. Make sure that your web browser is closed or started from the microserver, else the file will not be found. | Follow the Design Kit User manual found in the menu SG13S Features > Design Kit Documentation. Make sure that your web browser is closed or started from the microserver, else the file will not be found. | ||
[[Category:Mikroelektronikk]] [[Category:Integrated_Circuts]] | [[Category:Mikroelektronikk]] [[Category:Integrated_Circuts]] [[Category:Cadence_Virtuoso]] | ||
Revision as of 14:19, 30 October 2017
Cadence design with IHP 130nm process
Starting up the IHP SG13S Design Kit
The following steps describe how to install the Process Design Kit and start a new design.
Log on to server (mikroserver2 or mikroserver3):
ssh -X mikroserver2
The preferred shell is bash. When using another shell it will be necessary to change the installation routine and modify the initialization script accordingly.
The first time you are using the IHP design kit you should copy the user environment design to your chosen parent directory (e.g ~/ihp)
cp -rp /eda/design_kits/ihp_sg13/SG13S_616_rev1.5.0_a/work/skel ~/ihp
Change sh.cadence in ~/ihp/cds to suit your needs. In particular you must define $IHP_TECH and $PROJECT according to your local environment. Then set general and user Cadence environment variables by doing:
source /eda/cadence/2016-17/scripts/analog_flow.sh cd ~/ihp/cds/ source sh.cadence virtuoso &
To avoid having to do this every time try to set up your environment like described in MikroserverSetup
Follow the Design Kit User manual found in the menu SG13S Features > Design Kit Documentation. Make sure that your web browser is closed or started from the microserver, else the file will not be found.
