CZT-firmware: Difference between revisions

From ift
(Created page with 'List of included modules in hierachical order: ==Detector module interface (dm_if)== ==MUX (scdp_ch_mux)== ==FIFO== ==DPU interface (dpu_if) == ===xlink_rx=== ===rx register===…')
 
Line 2: Line 2:


==Detector module interface (dm_if)==
==Detector module interface (dm_if)==
interface to readout electroncs for the detector modules. Reads
energy, pixel and ASIC address, in addition to multihit information. Also
controls the pipelined ADC.
==MUX (scdp_ch_mux)==
==MUX (scdp_ch_mux)==
==FIFO==
==FIFO==

Revision as of 18:35, 18 October 2010

List of included modules in hierachical order:

Detector module interface (dm_if)

interface to readout electroncs for the detector modules. Reads energy, pixel and ASIC address, in addition to multihit information. Also controls the pipelined ADC.

MUX (scdp_ch_mux)

FIFO

DPU interface (dpu_if)

xlink_rx

rx register

xlink_tx

tx register

tx control fsm

Address decoder (adrdec_bgo)

Binning control module (BCM) (bin_ctrl_module)

Scdp channel mux

Bin address generator

Bin access control

Swing buffer

Bin module address arbiter

Memory bus interface (mb_if)

RCU master (rcumaster)

LED control

Memory bus interface (mb_if)

XA config (xa_cfg)

Resync register

Clock reset (clkrst)

Timetag generation (tt_gen)