View source for Get readout box up and running

===Overview===

==Hardware requirements==
*Focal read-out box
*Computer with Gb network capability
*One or more patch panels PCBs
*One or more flex PCBs with mounted MIMOS ASICs


==Software requirements and drivers==


==Using Xilinx Impact to configure FPGA(s)==

How-TO

==Configure TFTP server==

How-To


- Use XMD:
 $ connect mb mdm -debugdevice devicenr 4
 $ dow u-boot.elf

Open serial console
<pre>
$ tftp
</pre>

Boot Linux kernel:
<pre>
$ bootm
</pre>

Adjust MAC address and load startup script:
<pre>
$ ifconfig eth0 hw ether 00:0a:35:02:4b:a8
$ udhcpc
$ /home/test/load.sh
</pre>